Aqprox! appPCI300 Guia do Utilizador descarregar pdf (Página 56)

300Mbps Wireless N PCI Adapter – APPPCI300 User’s Guide English

• Maximum - Selects maximum mode to let the access point buffer incoming messages

for the Adapter. The Adapter will detect the access point if any messages are waiting

periodically.

• Normal - Normal mode uses maximum when retrieving a large number of packets,

then switches back to power save mode after retrieving the packets.

• Off - Turns power saving off, thus powering up the Wireless PCI Adapter continuously

for a short message response time.

 Network Type - There are basically two modes of networking:

• Infrastructure - All wireless clients will connect to an access point or wireless router.

• Ad-Hoc - Directly connecting to another computer, for peer-to-peer communication,

using wireless network adapters on each computer, such as two or more APPPCI300

wireless adapters.



Note:

k contains an Access Point or wireless router. All the wireless

or clients will connect to the wireless router or access point.

Wireless Mode - ps, 2.4 GHz 54 Mbps or 2.4 GHz 11 Mbps

e wireless mode

of the access point with which it associates.

 Wireless Mode when Starting an Ad Hoc Network - Specifies 2.4 GHz 54/11 Mbps to

start an Ad Hoc network if no matching network name is found after scanning all available

modes. This mode also allows the selection of the channel that the Wireless Adapter uses.

The channels available depend on the regulatory domain. If the adapter finds no other ad

hoc adapters, the channel that the adapter starts the ad hoc network with will be selected

automatically. The Adapter must match the wireless mode and channel of the clients it

associates.

 802.11 Authentication Mode - Select which mode the Adapter uses to authenticate to an

access point:

• Auto - Automatic causes the adapter to attempt authentication using shared, but

switches it to open authentication if shared fails.

• Open - Open System enables an adapter to attempt authentication regardless of its

WEP settings. It will only associate with the access point if the WEP keys on both the

adapter and the access point ma

s that have

the same WEP key.

1) An Infrastructure networ

devices

2) An Ad-Hoc network contains only clients, such as laptops with wireless desktop adapters. All

the adapters must be in Ad-Hoc mode to communicate.

 Specifies 2.4 GHz 300 Mb

operation in an access point network. The Wireless adapter must match th

tch.

• Shared - Shared-key only allows the adapter to associate with access point

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 222 223

Comentários a estes Manuais

Sem comentários

Aqprox! appPCI300 Guia do Utilizador Página 56

Comentários a estes Manuais